ReferenceDesignLibrary

Designs (214)

214 Results - Page 1/22 |< < 1 2 3 4 5 > >|

UCC28063EVM-723: 300W PFC, 390V, 85~265V in

Manufacturer: Texas Instruments

The UCC28063 is a dual-phase, transition-mode Power Factor Correction (PFC) pre-regulator. The UCC28063EVM-723 is an evaluation module (EVM) with a 390-V, 300-W, dc output that operates from a universal input of 85 VRMS to 265 VRMS and provides power-factor correction.

View Design

EPC9051: 1A, 0 ~ 40V, 15MHz, Class E Amplifier

Manufacturer: EPC

The EPC9051 is a high efficiency, differential mode class-E amplifier demonstration board that can operate up to 15 MHz.

View Design

MCP73833EV: Li-Ion Li-Pol, 1A, Battery Charger

Manufacturer: Microchip Technology

The MCP73833 Li-Ion Battery Charger Evaluation Board is an evaluation and demonstration tool for Microchip’s MCP73833/4 Stand-Alone Linear Li-Ion/Li-Polymer Charge Management Controllers. The evaluation board has two circuits provided with one circuit fully assembled and tested.

View Design

MCP7382XEV: Li-Ion Li-Pol, Battery Charger

Manufacturer: Microchip Technology

The MCP7382X Li-Ion Battery Charger Evaluation Board features three circuits utilizing the MCP73826, MCP73827 and MCP73828 devices to demonstrate simple, stand-alone, linear charging of single cell Lithium-Ion/Lithium-Polymer battery packs (the battery packs are not included).

View Design

LM5070HE EVAL: POE, 3.3V @ 3.4A Out

Manufacturer: Texas Instruments

The LM5070 HE (High Efficiency) evaluation board is designed to provide an IEEE802.3af compliant, Power over Ethernet (PoE) power supply.

View Design

EVL6562A-35WFLB: 35W PFC, 48V, 90 ~ 265 VAC

Manufacturer: STMicroelectronics

The board is a 35 W, wide-range mains input, power factor corrected SMPS (switched mode power supply) suitable for all low power applications requiring a high PF (power factor), such as lighting applications and power supplies for LEDs. The low-cost L6562A and the simple flyback topology combine to provide a very competitive PFC controller solution.

View Design

EVAL4981A: 360W @ 400V, 88 ~ 264 VAC

Manufacturer: STMicroelectronics

The L4981 integrated circuit is a continous mode average current controller with several specific functions for active power factor correction. It can operate in high quality, medium/high power conversion range and provides all the necessary features to achieve a very high power factor, up to 0.99. Thanks to the BCD technology used, operative switching frequency higher than 200kHz can be used.

View Design

EVALPM8800A-HP: POE 3.3V @ 6A, 5V @ 4A

Manufacturer: STMicroelectronics

This document details the characteristics and performances of the PM8800 demonstration kit which has been designed to cover a broad range of power over Ethernet (PoE) applications. PM8800 is a highly integrated device embedding an IEEE802.3af compliant powered device (PD) interface together with a PWM controller and support for auxiliary sources.

View Design

DC1621A: 2 Cell, 7.2V, 2A Max, LiFePO4

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 1621A features the LTM®8062, a 32V, 2A μModule® power tracking battery charger. The demonstration circuit is designed to operate from a 9.75V to 32V input source, and to charge a 2-cell battery pack to a float voltage of 7.2V.

View Design

DC1645A-C: 2 Cell, 8.2V, 2A Max, Li-Ion/LiPo

Manufacturer: Linear Technology/Analog Devices

Demonstration circuits 1645A-A, 1645A-B, 1645A-C and 1645A-D feature the LTM8061, a 32V, 2A μModule® Li-Ion battery charger. Operating from a 6.5V to 32V input source, the 1645A-A and 1645A-B demo circuits charge single cell Li-Ion batteries to float voltages of 4.1V or 4.2V respectively.

View Design
214 Results - Page 1/22 |< < 1 2 3 4 5 > >|